• <pre id="gyqpz"></pre>

    <track id="gyqpz"></track>

  • <td id="gyqpz"></td>

  • <td id="gyqpz"></td>
    İ  |  English
                      Switch Series
                      Hood panel
                      Appliance control panel
                      Water Controller
                      Oven Controller
                      New product
                      Production equipment
    Contact: Mr. Zhao 
    M.B:+8613605858620 18005858620
    M.B:+86 13605855063
    Q      Q1264186966
    Current position: Home > Products

    H26 Specification

    1Basic parameters



     Operating Voltage

    Operating voltage switch board main chip: +3.3 V - +5.5 V, +5 V DC voltage generally used as the standard operating voltage, error 5%

    Power board voltage: Input voltage AC 220V, output DC voltage +12 V and +5 V;

    +12 V DC voltage for the relay; +5 V DC voltage supply switch board controller chips work, the error is 5%

    Lighting voltage is AC220V

     Operating Current

     Switch board working current I Q 200mA
      Power board working current I Q 500mA


     See photos

    2Function Description

    Power key: Press the power button once , the display shows the power mark , it means that the switch into standby ; regardless of what kind of fan is in working condition long press the power button for 3 seconds to enter Beijing hour setting mode, this time by adding keys and minus keys to adjust the hour ; press the power button again will enter Beijing minute setting mode, the cursor can be reduced by adding keys and keys to adjust the minutes ; setting time to complete five seconds after exit time setting.

    Minus key : In standby mode , this button for continuous operation at high speed - medium - low - neutral - high in cycles .

    plus key : In standby mode , this button for continuous operation at low speed - medium - high - neutral - low in cycles .

    Lighting key: lighting control independently controlled from the power button , press the key once the light turn on lighting , switches also enters the standby state ; press lighting and once lighting off.

    Delay key : In standby mode , press the key to enter the 3 minutes delay default low delay time , then the delay time is flashing , can be reduced by adding keys and keys to adjust the Delay Time 0 - 9 minutes cycle.

    Remote Button Function

    TIMER keys: function keys with delay

    SPEED + button : Functions the same plus key

    SPEED- key : Functions the same minus key

    LIGHT keys: Menu with illuminated buttons

    ON / OFF key: If the lighting is not open, ie the switch is not in standby mode, press this key to switch into standby mode , when the fan is operable ; if the switch is in the standby mode when you press this key, the screen displays power mark , the other no output ; if the switch is in the standby mode and the fan is already running , press this button to turn off the fan and then the screen shows the power mark

    3Dimension Data

    Switch display panel
    Physical map

    Key Description Figure

    PCB Layout

    Switch top view Dimensions

    Switch back top view

    Power board

    Power Board physical map

    PCB Layout



    Physical map


    4All kinds of cable
    Power strip with switch cable between the display panel

    Lighting cable

    Fan cable

    Copyright (C)  Shengzhou Jincheng Electronics Co., Ltd.
    @超碰CAOPROM 永久地址发布,国产97人人超碰CAO蜜芽PROM,超碰CAOPORON进入 草棚